Descriptions:

The rotary vaporization drier is a new and high-efficiency
fIuidified drying equipment which is researched and deveIoped
for the sake of overcrning the low-efficiency and high-
consumed Static drying by our companyWe have joined the
characteristics of ordinary fIuidified drying such as air stream
drying and so on in designing process,and have developed
advantage and reduced shortcoming with the advantageous
usage function.All this really realizes the target of the
consuuming and high efficiency of the fluidfied drying,
The drier is wide used fOr drying of rubber and plasticizer,
agrochemcial. pigment, dyestuff, chemical industry,animal
feed,medicine and kinds of intermediates.

Principles:

Hot air enters into stirring and crushing and drying charnber frorn the bottorn of drier with suitable atomizing speed.lt exerts strong
shea ri ng .bIowing,fIoati ng and rotating effect to raw mate riaI,Therefore raw material is g ran u lated th ro ugh centrifug e, sh eari ng. impacting and friction effeCt.lt strengthens the process of heat exchange,At the bottom of drier,the Iarge and damp granule is crushed under the action of stirrer and the granule that is small in partical and contain less rnoisture will litt accompainied with revolving air stream.Durling the period of litt.it is dried further.Because gas and solid two phases flow in heat exchange.TherefOre the rnachine has Strong drying capacity

Features:

1 There are rnany kinds feding equipment for choosing.and feding is continue and static.
2  At the bottorn of drier,where is high temperature area,heat sensitivity raw material can not contact with heat surface direotlu,therefore it
solves the carbonized and changed color problems of heat senSitivity raw material.
3 There are air pressure equipment and shaft equipment,so can Ionger life of machine,
4 There is special equipment for sharing wind,and raising the amount of hot air
5 There are rotational flow pieces inside the drying chamber.lt is used to control the moisture and granle of raw rnaterial to needed level.
6 Because gas speed at circIe inside the drying chamber is high and the staying time of raw materiaI is short,high efficiency and quick speed
can be reaIized.

Technical Parameters:

Model	SKSZ-2	SKSZ-4	SKSZ-6	SKSZ-8	SKSZ-10	SKSZ-12	SKSZ-14	SKSZ-16
Mian engine	200	400	600	800	1000	1200	1400	1600
Air amount	350-500	1150-2000	2450-4500	4450-7500	7000-12500	10000-1800	13500-23500	18000-32000
Evaporated capacity	12-17	40-70	80-150	150-250	230-420	300-600	450-750	600-1000
Equipped power	6-10	12-14	20-25	27-32	40-47	50-65	60-72	70-90
Max height	3.5	4.2	5.2	5.6	6.2	7.0	7.4	8.0
Occupied area	10	18	25	32	38	45	55	75